I ignored the cleaning port under the air filter before. It is usually at the bottom of the air filter. If you have time, you should clean the air filter to the throttle. Fresh air is very important to the engine.
I washed the air filter box inside and out, and forgot to take a picture, but it looks very comfortable anyway.
How bored I am!
There was a small piece of instrument glass cover cracked, so I replaced it myself when I was free. Because I was unskilled, I first removed the cover and found it was not easy to operate. Then I removed the instrument and found that it was not easy to take it out. I also removed the steering wheel. By the way, I replaced the two bushes with large volume, cleaned the air-conditioning pipe, Cleaned the decorative cover, replaced the instrument glass cover, and finally put it back slowly.
After the steering wheel is removed, the instrument is relatively easy to disassemble. There are only six screws in total. First remove the two on the top of the glass cover, then remove the locking screws on the left and right sides of the lower edge of the instrument, and then turn the two 10# screws counterclockwise. Screw, you can pull the instrument out after hearing the click sound.
Pay attention when installing, the meter plug should be stuck in place first, and then the 10# screw should be screwed until it feels like it is slippery.
Material: 260; labor cost: 0; time spent: two hours.
Last time, we installed Mark Levinson’s power amplifier and speakers on the car, but the rear door of our LC100 cannot be installed with Mark Levinson’s coaxial, so we had to install a pair of Morel’s coaxial.
I am crazy about this matter all the time. It happened that my friend’s Lexus changed color, and I did not hesitate to pull his back door from more than 30 kilometers to the repair shop where I bought the car. I followed the gourd to draw a scoop, position, expand holes, and spray paint. , Finally settled a heart disease. Originally, I wanted to use an electric file to open a square hole and then use a plastic clip to follow the original car. The electric file was found, but the plastic clip couldn’t be found for a while, so I had to weld the nut on the back. I am also very satisfied. I am very grateful to the sheet metal master of Kunming Chenshi Auto Repair for his meticulous and perfect work.
Finally complete, four chrome-plated picks, by the way, deal with the additional Bluetooth receiver.
The insanity is committed again, and this place is also cleaned up. Is there anyone who is the same?
One twenty-fourth of the limit, the wages will be paid next month, and the insurance is bought in advance.
Get new shoes and get ready to go out!