Do it yourself, fix your Jimny’s high water temperature

As we all know, once the Jimny is played, it is easy to get high temperature. In order to solve the problem of high water temperature, I tried many methods and finally solved this problem. The previous idea finally landed. out ice storm cooling kit

The tap water is directly atomized and sprayed between the water tank and the air-conditioning radiator to achieve the cooling effect, which is summarized in one sentence.

Do it yourself, fix your Jimny's high water temperature

Remove the fender and install the designed water tank,

8 kg of water

Do it yourself, fix your Jimny's high water temperature

Install the prepared water pump and water level sensor, and lay the wiring harness

Do it yourself, fix your Jimny's high water temperature

White water pipes pass from below,

There is nothing wrong with the two water inlets, we are adding tap water

Do it yourself, fix your Jimny's high water temperature

Install wiring harness

Do it yourself, fix your Jimny's high water temperature

Do it yourself, fix your Jimny's high water temperature

Install the nozzle, but it can’t be photographed after it is installed. The nozzle is between the water tank and the air-conditioning radiator. It sprays atomized water just like the fuel nozzle, but the atomization effect is much better than that of the fuel nozzle. In the ice storm water pipe The pressure is as high as 8 kg, and the pressure in the fuel injector is only 3.5 kg.

Extending the above principle:

The size of the ice storm nozzle is 30 mesh, and the size of the matching filter screen for the pipeline is 60 mesh.

The working principle is that after the water temperature sensor detects that the temperature is high, the cooling system automatically starts to spray water, which sprays between the air conditioner radiator and the water tank to achieve a cooling effect. After reaching 98°C, the cooling system starts to work, and you don’t need to worry about it manually. up.

The cooling effect takes 30 seconds from 105°C to 96°C when the silicone oil fan does not work and the water cooling of the ice storm cooling kit is used alone, and the car is running.

It takes about 10 seconds from 105°C to 94°C when the silicone oil fan is involved in the work and the ice storm cooling kit is cooling down at the same time.

If you add water, add it once every 5-7 days in the normal running mode in the automatic mode, and add it once every 1-2 days for the limit crossing.