I have been slowly repairing it… Anyway, it is my last 60, ha, I have plenty of time to slowly toss him
When BJ meets Toule… Ha…
It’s just for the convenience of traveling by adding a roof tent and changing the trunk to a storage lathe. The annual inspection of this lathe can be omitted. Why? Because somewhere in the middle of me (width 1 meter, height 50) can be opened like a seat, ha. In addition, a set of seat covers with many pockets is installed, so it is easy to put things…
The lathe is not disassembled, and the third row of seats is not installed, so the annual inspection should be possible, ha, I really admire me who loves tossing!
Toss a day today, what changed? ! Change 61 steering gear, 61 alternator, add 135A battery…to provide driving comfort for long-distance travel, and you can also cook and steam vegetables while driving. Ha, is this the rhythm of going to wander?
I changed back to the original 60 high-voltage line (it is definitely 4200, not 4500 or 4800), and I feel that the ignition is smoother, and I have changed many cars. I feel that some things are still reliable from the original factory.
60 seats, 150 yuan to buy the original factory modified parts, and 100 yuan to add a leather case
In the same frame as the L board Toule y60
After the car was raised and the 61 steering gear was changed, the steering rod was not changed to be adjustable, but the original rod was cut off and the ball head was changed to a different direction. The steering direction was more right and less left, which always made me feel uncomfortable.
The stage 60 on the stage changed the directional tie rod developed by Mowgli. I think it is thick, not how thick the tie rod is, and this tie rod can be installed with the ball head of the original car’s cross bar, the ball head of the tie rod, and the two ball heads behind the front axle. The direction is opposite. one of each. This ball head is much thicker than the ball head of the directional tie rod. The steering rod developed by Wuji is equipped with the length of the 60 steering machine. I changed the 61 steering machine, and the ball head must be aligned, so the rod is a little longer and needs to be shortened so that it can be adjusted to turn as much as the left and right directions. Especially Reminder!
The master is meticulous in his work, shortening the length of the welding technology, and then spraying it with red paint to prevent rust. The tie rod is really beautiful and easy to use. time cost!
(full text)
