“Land Cruiser” has the reputation of 4WD king, and we are used to respectfully call it “Land Cruiser” or LC200 Land Cruiser. A hard-core benchmark with extraordinary potential, the Land Cruiser, whether it is the quagmire and steep pits in the south or the Gobi Desert in the north, has excellent extreme off-road capabilities and calm and confident control, and has become a “net celebrity” in the off-road industry. There are also various plans for the modification of LC200, such as changing the front and rear bumpers, side bumpers, lift, roof frame, tail box, winch, etc. Today, I will mainly talk about a more practical modification-installing center grille spotlights. Not much to say, just go straight to the picture.
The rider needs to install the built-in grille light, ask us if we have done it, because it has not been installed before, and a rider just came to install the built-in winch bracket. The masters made a light stand according to the position.
Immediately contact the factory to make a little modification according to the sample and make a finished product. Compared with the previous ones, the appearance has not only increased by a notch.
Fix the light stand.
After installing the lamp holder, secure the lamp.
A pair of yellow lights and a pair of white lights can be controlled separately to meet the needs of different occasions.
After about two hours, the installation was completed and the lamps were tested.
Try how far the light can be found, because the weather is still early, the effect is not so obvious.
After comparison and debugging, let the light just pass through the grid of the grid.
Here’s a side picture.
The “little sun” was photographed at the front of the car before the car friend drove away.
